Apple Wireless Keyboard: a way to install or replace batteries

Some desktop computers with wireless keyboards or mice are shipped with the devices pre-paired and therefore the batteries pre-installed. As long because the wireless devices are powered  on when the computer starts up, no additional steps should be necessary to form them work. If one or both of the wireless devices do not function obviously, use the data below to spot and resolve the difficulty.

Note: These instructions work with mackintosh OS X v10.5 Leopard.  For troubleshooting wireless keyboard and mouse problems in mackintosh OS X v10.6 ounce, see Desktop computers: Troubleshooting wireless mouse and keyboard problems.
Resolution

Make sure the wireless keyboard and mouse are turned on

If the system has already started up and therefore the keyboard or mouse indicator lightweight is flashing, the keyboard or mouse is "discoverable" by the computer and should not presently be paired with the computer. For more info on pairing wireless devices confer with a way to discovered your Apple Wireless Keyboard.

Reset the Bluetooth device
First attempt turning your device off and so on again. Once powered  on, the wireless device will remain in the "discoverable" mode for three minutes. For more data confer with sanctionative ascertainable mode.

Restart the computer
Try restarting your computer to check if that addresses the difficulty. If not, attempt movement down your computer, waiting a moment, and so beginning it back up again.

Check battery levels

Your mackintosh will inform you when you should replace the batteries in the keyboard and mouse. you can also manually check the battery level of the Apple Wireless Keyboard and Apple Wireless Mouse by following these steps:

 select System Preferences from the Apple  menu.
 select Keyboard & Mouse from the read menu.
 choose the Bluetooth tab.

       Note: The battery indicator does not show battery levels of non-Apple Bluetooth mice and keyboards.  If you do not see a battery indicator, certify you're exploitation Associate in Nursing Apple Wireless Mouse or Keyboard.

Check for signal interference
Because Bluetooth works by transmittal signals through the air, some things can interfere with the wireless affiliation. Avoid situations during which metal objects come back between the device and therefore the computer. don't place the computer below a metal desk or fastened away behind a metal cupboard. Keep cordless phone base stations, microwave ovens, and other electrical devices that treat a a pair of.4 ghz information measure away, and certify that the wireless device and computer are not over 30 feet aside from each other.

Archived - Apple Wireless Mouse: a way to Install or Replace Batteries

The Apple Wireless Mouse uses 2 AA batteries. to put in the batteries:

 flip the mouse over and turn it off.
 take away the battery compartment cover.
    Slide the batteries into the battery compartment as shown in Figure 1.
    Replace the battery compartment cover.
 flip the mouse on if you're ready to use it.

    Figure 1 Inserting batteries

If you have ne'er paired your mouse along with your computer, you'll need to do that before you can use it. See Bluetooth: a way to discovered Your Apple Wireless Mouse for more info.

If you have antecedently paired your mouse along with your computer, you are doing not need to discovered the mouse again when replacement the batteries. The mouse should mechanically pair itself with the computer a number of moments when you turn it on.

The Apple Wireless Mouse comes with 2 nonrechargeable AA atomic number 3 batteries. you can also use alkalescent or reversible AA batteries.

Important: certify to place the positive and negative ends of the batteries in the mouse as shown in Figure 1. The mouse will not turn on if the batteries are incorrectly put in.

When you change the batteries, replace all of them at the same time with the same reasonably battery. With atomic number 3 and other battery varieties, do not open the batteries, expose them to flame, or in the other approach violate the manufacturer's instructions. get rid of batteries in step with local laws and rules.

For additional info, see the Apple Wireless Mouse User Guide.

Archived - Apple Wireless Keyboard: a way to install or replace batteries

The Apple Wireless Keyboard comes with four nonrechargeable AA atomic number 3 batteries. you can also use alkalescent or reversible AA batteries.

Note: If you would like to put in or replace batteries in the newer metallic element Apple Wireless Keyboard, see this article.
To install the batteries

 flip the keyboard over and turn it off.
 take away the battery compartment cover and batteries.
    Slide the batteries into the battery compartment as shown in Figure 1.
    Replace the battery compartment cover.
 flip the keyboard on if you're ready to use it.



Figure 1

Inserting batteries

 

If you have ne'er paired your keyboard along with your computer, you'll need to do that before you can use it. See this article for more info.

If you have antecedently paired your keyboard along with your computer, you are doing not need to discovered the keyboard again when replacement the batteries. The keyboard should mechanically pair itself with the computer a number of moments when you turn it on.

Important: certify to place the positive and negative ends of the batteries in the keyboard as shown in Figure 1. The keyboard will not turn on if the batteries are incorrectly put in.

When you change the batteries, replace all of them at the same time with the same reasonably battery. With atomic number 3 and other battery varieties, do not open the batteries, expose them to flame, or in the other approach violate the manufacturer's instructions. get rid of batteries in step with local laws and rules.

For additional info, see the Apple Wireless Keyboard User Guide.

article source : موس بی سیم طرح اپل

Apple WebSite : Apple